What's new in 2009!
 |
SPIKERSPIKER is a small Pump & Auto-Rate Control Module / system including associated plumbing & hardware.SPIKER is incorporated in series with other Liquid Systems (SA) Pump & Control Modules. It compliments liquid fertilizer application regimes by providing a means whereby a mixture of compatible trace elements, fungicides etc. can be injected at a fixed or variable rate into the carrier liquid. Since SPIKER is a totally independent system the problem of injected products always being tied as fixed ratio to the carrier liquid (e.g. tank mixing or mechanical dosing devices) is eliminated. |
 |
800 Series Fill FasciaLaser cut 5.0mm stainless steel fascia incorporating 2" valves for product fill & tank venting functions, 2" valve flush water fill, rinse tap & plumbing kit. |
 |
V3 Check ValveThe Liquid Systems (SA) exclusive in-line V3 Check Valve can be ordered as an optional extra in our 2009 V3 'Stacker' metering system range and has been designed so that it may be retro- fitted to our existing metering systems.Designed so that is has minimal effect on system hysteresis it is an important addition to our product range. The V3 Check Valve is positioned downstream from the primary restrictive device (line meter) and as near as is practical to the point of liquid termination so that liquid supply lines remain charged when the flow is shut off. |
 |
Treflan KitsComprehensive pre-emergent spray bar kits with components easily adaptable to tillage equipment for single pass operations.Use in conjunction with Liquid Systems (SA) MM (Multiple Module) Series pump & control systems. Click here for more information |
 |
Section ControlTo be used in conjunction with mapping systems for independent and automatic section liquid control across the seeder bar. Each 12V shut-off valve controls a single V3 Stacker manifold mounted on the bar.Available to 8X sections – complete with stainless steel 'U' bolt mounting bracket assembly (not shown). |
back