A-i120
The new 2010 Liquid Systems (SA) A-i120 is a single pump, single auto-rate combined pump & control module. It features an LQS Enhanced hydraulically driven Bertolini 2136 (126 lpm.) poly pump with custom flow block that ensures that maximum rpm. is not exceeded.
The pump & associated pressurised plumbing is protected by a tamper proof safety valve coupled directly to the pump, prior to the control valve set.
Primary filtration is via a fascia mounted 2" X 32 mesh suction filter.
Other fascia mounted components include a selector valve to source either product or clean water - (for system purging), a custom 316 SS pressure gauge to monitor operating pressure for system analysis & an external flush port to enable purging of the metering system from an external source.
The A-i120 module houses a full rate control system utilising a custom 460 TeeJet regulating valve, 801 flow meter, 460 shut-off valve, pressure transducer & numerous custom designed components.
Suction, tank agitaion & all necessary hose kits with tank isolators are standard.
The Liquid Systems (SA) L2 dual liquid rate controller comes standard with this module. The monitor now displays system operating pressure & pump rpm. as these function are now incorporated into the valving & pump assemblies.
The A-i120 cabinet & all associated fasteners & fixing mechanisms are stainless steel. A-i120's can be series coupled for dual liquid operation without the requirement for extra hydraulic flow.
SPIKER EVI can also be series coupled to this module without the requirement for extra hydraulic flow.
back